1. NDT Equipment and Accessories
  2. Advanced NDT Solutions

Industrial Scanners

Industrial XY (motorized and manual) and manual weld inspection scanners provide reliable, accurate performance in a wide range of heavy duty industrial applications in which scanners are used to improve quality and reduce costs. PA scanners and scanner accessories such as motor controllers and water pumps complete the Olympus line of scanner products.

Scanner Accessories

Scanner Accessories
From couplant feed units to pulsers and preamplifiers, Olympus offers multiple accessories to help improving data quality as well as ease and repeatability of inspections.

Weld Inspection Scanners

Weld Inspection Scanners
Olympus has a wide range of scanners to address fabrication or maintenance weld inspections needs. We have solutions for small pipes up to flat plates with the capacity to hold multiple probes for a complete weld volume coverage. Even if you choose a motorized or manual type, you will be amazed by their versatility, dependability and repeatability.

Corrosion Inspection Scanners

Corrosion Inspection Scanners
Corrosion mapping is a high demanding application that requires up to 2 precise axes encoding position capability of a unique probe. The scanners can be mounted on pipes and flat surfaces and are easy to use for fast detection of defect from manufacturing induced lamination to in-service wall thickness reduction.

MapSCANNER

MapSCANNER
The MapSCANNER is a semiautomated, 2-axis corrosion inspection scanner. When combined with the HydroFORM or Dual Linear Array (DLA) phased array corrosion mapping solutions, it is a powerful, efficient tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.

WeldROVER

WeldROVER
The WeldROVER is a simple, industrial-strength, one-axis encoded motorized scanner that provides fully automated data acquisition. It makes efficient phased array weld inspections on ferromagnetic piping or vessel using up to 6 probes. UT, TOFD, PA.

RollerFORM

RollerFORM
The RollerFORM is a phased array wheel probe specifically developed to facilitate high-quality, immersion-like ultrasonic testing of composites (CFRP). An affordable replacement for full 2-D encoding systems, the RollerFORM also offers a viable alternative to immersion techniques.

HydroFORM / RexoFORM Scanners

HydroFORM / RexoFORM Scanners
By bringing a semiautomated phased array solution into the corrosion inspection market, Olympus has not only introduced a new technology, but also a new world of possibilities. Say goodbye to unsafe and unreliable motorized rastering of small UT probes; phased array probes cover a larger surface, and can be manually traveled at a safe speed.

HST-Lite Scanner

HST-Lite Scanner
The new HST-Lite scanner is the perfect choice for cost-effective, one-channel TOFD inspections when signal quality is important. The combination of magnetic wheels and spring-loaded probe holders offer the stability required to perform high quality, one-line inspections.

VersaMOUSE Scanner

VersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction.

HSMT-Compact Scanner

HSMT-Compact Scanner
The HSMT-Compact is a manual one-axis encoded scanner. In particular, it is light and small, and also versatile. It can be used (with up to 4 probes) on plates and for circumferential scans on pipes as small as 4.5 in. OD pipes.

HSMT-Flex Scanner

HSMT-Flex Scanner
The HSMT-Flex is intended for manual one axis encoded inspection of circumference welds on pipes of 4.5 in. OD and greater. The scanner can be fitted with up to 8 probes using optional probe holders, thanks to its capacity to bend in the center.

MapROVER

MapROVER
The MapROVER is a fully automated, motorized 2-axis corrosion mapping scanner. When combined with the HydroFORM phased array corrosion mapping solution, it is a powerful tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.

COBRA Scanner

COBRA Scanner
The COBRA manual scanner combined with OmniScan MX2 flaw detector and a 16:64 module is used to perform circumferential weld inspection on small-diameter pipes. The COBRA can hold two PA probes to inspect pipes with OD ranging from 0.84 to 4.5 in.

HST-X04 Scanner

HST-X04 Scanner
The Olympus HST-X04 time-of-flight diffraction (TOFD) manual scanner offers an efficient, low-cost, and versatile weld inspection solution.

Mini-Wheel Encoder

Mini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.

WING Scanner

WING Scanner
The WING scanner is a 2-axis scanner for manual ultrasonic inspections. One scanning axis is flexible and conforms to the contour of the part being inspected. Vacuum cups make the Wing Scanner well suited for non ferromagnetic surface inspections.

GLIDER Scanner

GLIDER Scanner
The GLIDER scanner is a 2-axis (X-Y) encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner, held by suction cups is well suited for raster scanning. Technologies: ECA, EC, UT, PA.

CHAIN Scanner

CHAIN Scanner
The ChainSCANNER provides a manual pipe-inspection solution for pipes between 1.75 to 38 in. OD. The scanner, held by chain links instead of magnetic wheels is well suited for weld or corrosion inspection on different type of materials. UT, TOFD, PA.

Aerospace Inspection Scanners

Aerospace Inspection Scanners
Inspection of large area requiring fast C-scan acquisition is a key feature for the aerospace industry. Adapted scanners that mainly use suction cups are well suited to hold on composite surfaces and perform mapping with up to 2 precise encoded axes.